When I first unboxed my Hypervolt Home 3 Pro, I noticed straight away that it looked like a slightly refined version of the standard Home 3, but the real story lives inside the case rather than on the surface.
This Smart EV Charger is a 7kW, Type 2 unit that’s compatible with every well-known car brand on the road today, and it connects through Wi-Fi or Ethernet to give you a seamless connected experience at no extra cost.
The power cable itself now exits from the back rather than the bottom, which is a small but welcome design tweak for anyone who cares about a tidy charging point at home.
Hypervolt Home 3 Pro Safety & Documentation
Reading through the documentation and installation instructions for the Hypervolt Home 3 Pro before installation matters more than most people realise. The Legal Notice makes clear that product images are used purely for illustration purposes and may not offer an exact representation of the unit you receive, since Hypervolt Limited reserves the right to change specifications without prior notice.
Every installer and end user is expected to work through the safety instructions and safety precautions in full; the Safety Notice warns that ignoring them can cause injury or even potential death to the operator, installer, or third parties, along with damage to the electric vehicle on charge and to building electrical systems in the surrounding environment. Skip these safety dispositions and you’ll invalidate the warranty too.
Compliance and Build Quality
None of this is just legal box-ticking, though. The Hypervolt Home 3 Pro has been designed, developed, and manufactured to meet real norms, in line with the directives set out in its declaration of conformity, and this reference guide exists to stop improper operation before it starts.
Beyond the compliance side, what you’re actually buying is a beautifully designed, high quality charger with genuinely advanced features and solid internal hardware, built around everyday home charging needs and finished off with proper Smart Home integration as standard a pro version that earns its name.
Hypervolt Home 3 Pro Product Overview
For anyone new to the brand, this manufacturer makes a tethered charger, meaning the charging cable stays permanently attached to the unit rather than needing a separate lead. Pricing sits around £1044.90, or roughly £14.27 a month on finance, which puts it toward the pricier end of the market, but you get real premium features for that money. Solar integration, real time energy monitoring, automated load management, and support for smart energy tariffs such as OVO Charge Anytime and Intelligent Octopus Go all come bundled in.
Solar Integration and Updates
If you already have solar panel installations, you can charge car batteries straight from the power of the sun, which means free charging whenever the weather cooperates. Anyone running an AC-coupled home battery or a wider solar generation system can add a CT clamp so the charger can accurately monitor and respond to what’s happening around the house.
Firmware updates arrive over-the-air, so the unit keeps getting upgraded with the latest features automatically, and there’s built-in pen protection too. Because it doesn’t need an Earth Rod, installation becomes quicker, safer, and more affordable than chargers that do.
App Features and Usability
Once it’s up and running, you’ll stop worrying about tripping fuses whenever several appliances switch on at once, since the charger adjusts itself to your household load. The Hypervolt App handles scheduled charging, real-time energy monitoring, LED modes, and downloadable consumption reports, all from your smartphone.
It’s OVO Energy Compatible and works with Octopus Energy, ships with a 5 metre Type 2 cable, and offers Mobile control & monitoring so you can Schedule charging for optimal times whether you’re Connected through Wi-Fi Or Ethernet. Real time consumption reporting, Integrated Cost Control, and Integration with your Smart Home round out the software side, while being Optimal For Solar Charging and able to Install without an Earth Rod keeps things simple.
Over The Air software updates mean you’ll never deal with tripped fuses again, Tariff/scheduled charging mode is built in, and the unit is OZEV Eligible. It comes in Colour Ultra Black, measuring 328mm by 243mm by 101mm, backed by a 3 year warranty when a qualified professional handles the install and yes, it’s compatible with all well-known car brands.
Design and Footprint of the Hypervolt Home 3 Pro
In terms of size, the Hypervolt Home 3 Pro sits neatly between the Ohme Home Pro and the Andersen A3, measuring 328cm high, 243cm wide, and 101cm deep. That footprint means the charging cable can be wrapped around the unit itself, which is genuinely space-saving and looks a lot neater than smaller tethered chargers that need a separate cable hook drilled into the wall.
The overall look follows a minimalist design, a space-age rectangular design, with LED lights on the front that glow in different colours depending on the theme you pick.
LED Lights and Color Options
I’ll admit those lights can draw a bit too much attention to the house after dark, but they can be turned off via the app if that’s not your thing. There are three colour options white, space grey, and black and I’ve always leaned toward the darker colours myself when setting up a tethered charger at home. Cable length matters just as much as looks, especially if your driveway is awkwardly shaped, so the manufacturer gives you cable options of 5m, 7.5m, or 10m.
Cable Lengths and Handling
During my own testing, the longer cable gave plenty of reach across a large driveway no matter where the car parked. It stays light and flexible, so anyone with mobility issues shouldn’t struggle manoeuvring a heavy cable around. The only snag is that the cable can start to coil after frequent use, though unravelling it and stretching it out now and then sorts that out. Specs-wise it ships with a 5 metre Type 2 cable, finished in Colour Ultra Black at 328mm by 243mm by 101mm.
Upgrades in the Hypervolt Home 3 Pro
The Hypervolt Home 3 Pro shows that the brand has clearly been listening to installer feedback, because it is built for an easier install than its predecessor. Installers get insides cleaned up for easier drilling, plus an included wall bracket that saves the job of trying to measure mount holes by hand. From a user perspective, that translates into a home charger that’s up and running faster, with less time spent with the power off.
Refined Exterior Looks
The cleaner looks come from those same cleaned-up components: there’s now space at the back to drill a hole for the power cable, so it no longer has to exit from the bottom. That leaves a genuinely clean look, with no visible wires beyond the charging cable itself. Among the other improvements over the original 3.0 model are brighter LEDs, for anyone who wants their house to light up like a Christmas tree, and more robust materials throughout.
Improved IP Rating and Durability
The tougher outer shell shows up too. Where the original unit carried an IP rating of 54, protected against light dust and water splashes, the Pro version jumps to an IP rating of 66, making it fully dust proof and protected from heavy water streams handy if a jet washer gets a bit enthusiastic while you’re washing the car.
There’s better UV protection as well, so the white version won’t turn yellow as it ages, unlike an old Super Nintendo gathering dust in the loft. And if the outer casing ever does discolour, you can now remove it and swap it for a new one.
Exploring the Software
On the software side, the companion app stands out as one of the nicest-looking charging apps I’ve used. The home screen greets you with a handy infographic showing exactly how much energy usage your household load and charger are pulling, and where it’s coming from — useful if you’re monitoring a solar array and want to see how much power it’s generating. One feature I really rate is being able to switch between charging modes, jumping from grid to solar energy quickly whenever you fancy.
Smart Tariff Integration
When I was on the Octopus Go energy tariff, I kept the charger on scheduled charging, but switching to Intelligent Octopus meant I could drop straight into plug and charge mode and let the Octopus App take over charge scheduling entirely. There’s also a boost mode on hand, which will override any schedule and hand you a one-off max charge whenever you need it in a hurry.
Customizing Charging Schedules
Setting a charge schedule is easy to customise around particular hours of the day or particular days, which could suit anyone hoping to rent out their home charger on certain days. You can also lean on the solar modes and program charge schedules around the three built-in solar modes, so the car can charge with solar during the daytime and switch across to off-peak grid power once night falls.
Tracking Your Charging Costs
Tracking costs and trying to calculate savings is handled by the integrated cost control feature, and the cost tracker logs the date and time of every session along with the kWh used and the cost involved. You can look back through past charging sessions, select date ranges, and export everything to a spreadsheet showing the total amount spent handy for working out exactly how much electricity is owed between paydays.
Hypervolt Home 3 Pro App Gripes
My one minor gripe with the cost tracking on the Hypervolt Home 3 Pro app comes when entering energy tariff rates, since the app won’t let you set start and stop times together for off-peak rates you only enter the start time, and it automatically adds a stop time based on the next rate’s start time.
The catch is that it treats 00:00 as a stop time, so an off-peak rate before midnight, like Intelligent Octopus Go’s off-peak window running 11:30 to 05:30, means you have to add three rates: one for the part before midnight, one for the part after midnight, and one for the peak rate. It’s a small fiddle, but worth knowing before entering your own energy rates.
FAQs
What is the price of the Hypervolt Home 3 Pro?
The unit itself typically costs between £620 and £780 (including VAT), depending on the cable length selected. When combining the charger with standard UK installation, total costs generally range from £1,025 to £1,100.
What vehicle compatibility does this home charger offer?
Compatibility covers all Type 2 electric vehicles and plug-in hybrids sold across the UK and Europe. The standard Type 2 connector ensures plug-and-play charging across virtually all modern EV makes and models.
Is the charging unit tethered or untethered?
It is manufactured exclusively as a tethered charging unit, coming equipped with a permanently attached Type 2 cable. Unlike untethered models that require fetching a separate cable from your car boot, this design allows you to plug straight into your vehicle.
What cable length options are available for the charger?
You can select from 5m, 7.5m, or 10m fixed lead options. All options deliver up to 7.4kW single-phase charging speed, with the 10m option providing extra reach for long driveways, detached garages, or offset parking bays.
What are the UK installation requirements for the Hypervolt Home 3 Pro?
Installation requires a qualified electrician to connect the charger to a single-phase 230V mains supply. Because it features integrated PEN fault protection compliant with BS 7671 wiring regulations, the system does not require an external earth rod.
